概述
Measuring Range in Steel
0.025 - 6.00 inches
0.60 - 150.0 mm
The Check-Line TI-25M Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The TI-25M can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25M probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
参数
Range in Steel |
0.025-6.00" (0.60-150.0 mm) |
Resolution |
.001" (0.01 mm) |
Display |
4½ - Digit, 0.5" Back-lit LCD |
Velocity Range |
0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec |
Probe |
7.5 MHz, 0.25" Diameter (6.35 mm) |
Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C) |
Battery Type |
Two AA batteries |
Battery Life |
200 hours |
Weight |
7 ounces (196 g) |
Size |
2.5 x 4.5 x 1.25" |
Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
Warranty |
Gauge: 5 Years |